Accounts Receivable
Balancing [R0404]
End of Period: This process can be run either interactively through this update or seleted to run as a special month-end version during EOP End of Month. As an EOP module, the process is:
EOP Only |
Yes* |
Frequency |
Monthly |
Sequential Updates |
No |
Skip Notes |
No restrictions |
*The special month-end version of this report is only available through EOP End of Month, but is otherwise the same as the interactive version, using the same processing but with selection criteria specific to End of Month.
For more information about End of Period, refer to U04 End of Period Overview.
The
Accounts Receivable Balancing report [R0404] provides a register of all outstanding
accounts receivable items. It may be used to reference payments/charges accrued
but not yet paid and to reconcile the Lease Payments Receivable General Ledger
account balance on the General Ledger Entries Listing report [R0406]. The Accounts
Receivable Balancing report [R0404] may also be used when reversing partial payments
and prepayments via the Payment Reversal option of the Payment update [U0102].
For leases with
a suspended earnings status, receivables due after the effective date of the earnings
suspension are identified and reported as memo items on this report. All use tax
continues to be reported as normal, however, because use tax receivables (set
up in the Lease Payments Receivable General Ledger account) are unaffected by
the suspended earnings status. Lease payments due on or before the earnings suspension
effective date are also unaffected.
For
leases extended using the RES method on a cash basis, deferred income and deferred
residual are identified separately and reported as memo items on this report.
They are still included in the total balance for Lease Payments Receivable and
as such will print in the payments column. These fields may be used to reconcile
the corresponding General Ledger account balances on the General Ledger Entries
Listing report [R0406].
If
the JULE Fund 1994 enhancements are purchased, advanced invoices may be produced
up to 120 days before their due dates. Such invoices do not affect the G/L until
they accrue, but they do appear on the Accounts Receivable Balancing report with
an A (advanced) suffix on their invoice number. Subtotals for advanced invoice
amounts appear for each portfolio/ company/region/office.
Two
reports are produced, one for other than interest bearing loans [R0404A] and one
for interest bearing loans [R0404B].
The
report may be accessed through the Audit Control report menu [R04] and may
be selected interactively for:
- All
leases
- All
customers and groups
- A
portfolio
- A
company
- A region
- An
office
- A lease
- A
customer
- A
customer/group
The
report may be automatically generated for each portfolio at the end of the month
through the End of Period update [U0401].Use
the End of Period MODULES
AND REPORTS screen under the End of Period Customizations
option of the Portfolio update [U0212] to specify whether
the report is created.
LeasePak always uses the tax rate applicable to the lease due date, not the tax rate applicable to the date on which the accrual occurred.
Accounts
Receivable Balancing Selection
- ALL
Enter X to report on all
leases. Leave blank to report on a specific portfolio, company, region, office,
lease, customer and/or group. If ALL is selected, leases that belong to a customer
or to a group are also reported, however, these leases are sorted by their portfolio,
company, region, office, and lease numbers, rather than their customer or group
numbers.
- ALL
CUST
Enter X to report
on all customers. Leave blank to report on a specific portfolio, company, region,
office, lease, customer and/or group. If ALL CUST is selected, only leases that
belong to a customer or to a group are reported (sorted by customer and group).
- PORT
Enter the number of the
portfolio upon which to report. Leave blank if reporting across portfolios.
- COMP
Enter
the number of the company upon which to report. Leave blank if reporting across
companies.
- REGN
Enter the number of the
region upon which to report. Leave blank if reporting across regions.
- OFFIC
Enter
the number of the office upon which to report. Leave blank if reporting across
offices.
- LEASE
Enter the number of the
specific lease upon which to report.
- CUST
Enter the number of the
customer upon which to report. CUST may not be entered if a portfolio, company,
region, office, or lease number is entered. CUST must be entered if GROUP is entered.
- GROUP
Enter the number of the
group upon which to report. GROUP may not be entered if a portfolio, company,
region, office, or lease number is entered.
Accounts
Receivable Balancing Report

Note: that the AR Balancing Report appears in the xml format if, on the Reports tab page of the Report Profile window,
the XML Reports switch is selected.
The
Accounts Receivable Balancing report [R0404A] reports at the invoice level and
provides the following detail for each accounts receivable item:
- LEASE
The
lease number is displayed. If a Payoff
[U0103] or Termination
[U0103] has been performed on a lease, a 'Q' for a lease payoff, or a
'P' for an asset payoff is displayed before the lease number.
- SE
This column designates if
a lease is in suspended earnings status or is extended. An asterisk (*) is displayed
if the lease is in a suspended earnings status and the INVOICE DUE DATE is after
the effective date of the earnings suspension. An R is displayed if the lease
has been extended using the RES method on a cash basis and the INVOICE DUE DATE
is after the commencement date of the extended term.
- LESSEE
NAME
The short form
of the lessee name is displayed.
- INVOICE
NUMBER
The invoice number
of the payment is displayed. Also displayed are credit memo numbers which indicate
a prepayment has occurred. For advanced invoices which have not yet accrued, the
number is followed by an A.
The invoice number appears as a link. Report allows the user to view the details of the invoice by the Invoice number link. The Invoice Detail window is displayed as follows:

In the above screen of report, Sales / Use Tax appears as a link. Sales/Use Tax link provides the detailed view of sales tax breakdown that itemizes how much tax goes to the state, county, and city for each asset and assessment. The Sales/Use Tax Detail report is as follows:
The report displays sales tax breakdown to include separate state, county, and city amounts along with a total of all three for each asset and each type of charge. Users can re-sort the report by selecting the heading of the column by which to sort.
If, for the particular invoice, waiver records are found, the amount of the waiver will be subtracted from the amount of the matching assessment record so that the amount displayed on the Sales/Use Tax Detail report is the resulting total of all assessments and waivers for the given Type and Asset. The amount of sales/use tax shown will total to be the same as the billed amount on the Invoice Detail report. Once an assessment is waived, it is no longer considered billed and is removed from the invoice detail as well as from the Sales/Use Tax Detail report. This is different than when an assessment is paid and the billed amount does not change.
Note: that the sales tax breakdown requires data generated as part of the
JULE Fund 2002-2003
module package and therefore that module is required for the data to be available. All invoices generated prior to the installation of that module will display no breakdown information.
For Vertex O users only: The above screen will only appear for vertex O invoices.
R0404 AR Balancing report displays all receivables that have not yet received payment including advanced invoices that have not accrued yet.
The XMl view of R0404 details and displays invoice. Click on Invoice No. to view details.
-
Sales/Use Tax
Click to see a breakdown of the tax amount. The amount of tax is not stored in tax table, because the tax amount has not accrued.
LeasePak will not display the Sales/Use Tax line when the invoice is in advance.
R0404 displays all receivables that have not yet received payment including advanced invoices that have not accrued yet. When user creates an
assessment invoice as an “I” type invoice in the future and advanced invoice is created for the same due date on that lease, the advanced invoice is
an "H" type invoice. AR Balancing take both the "I" type invoice and the "H" type invoice and merges them together using the invoice number from the
"I" type invoice.
- INVOICE
DUE DATE
The payment
due date of the invoice is displayed.
- PAYMENT
AMOUNT DUE
The lease
payment amount excluding use tax is displayed. Also included in this field are
any interim rents, security deposits or down payment amounts due and outstanding.
Payment amounts of
invoices due after the effective date of the earnings suspension of a suspended
lease are not displayed in this column. They are displayed in the OTHER AMOUNT
DUE column.
Payment
amounts of invoices due after the commencement date of an extended lease are displayed
in this column but are reported based on their respective component; the Residual
portion of the payment (if any) is reported separately from the income portion
(if any). This applies to leases extended using the RES method on a cash basis.
The descriptions are displayed in the TYPE OF OTHER column. These extended amounts
are not included in the total at the bottom, but are instead totaled as a separate
items. The TOTAL PAYMENT + TAX will include them so that LEASE PAYMENTS RECEIVABLE
may be reconciled to the [R0406].
If
the lease is a variable rate operating lease (accrual type AOVE or ROVE), the
PAYMENT AMOUNT DUE consists of principal and interest, adjusted by the float rate.
The OTHER column shows the interest adjustment. Thus PAYMENT and OTHER together
equal the payment amount entered for the lease when it was originally booked.
A breakdown of principal and interest can be seen on the Payments update [U0102]
for the invoice and on the Collection Summary [U1101].
- USE
TAX AMOUNT DUE
The outstanding
amount of use tax is displayed. Users can view a breakdown of this tax amount by selecting the invoice number link.
- TYPE
OF OTHER AMOUNT DUE
A
description of additional charges or assessments due (e.g., Property Tax, Late
Charges, Recurring Charges, Deferred Residual etc.) is displayed. Credit memos
are also identified in this column.
If
the lease is in a suspended earnings status and the INVOICE DUE DATE is after
the effective date of the earnings suspension, SUSPENDED PRINCIPAL and SUSPENDED
INTEREST is displayed for simple interest and precomputed type leases. SUSPENDED
INTEREST is displayed for operating type leases.
If the lease is in suspended earnings with status 'N***' and the switch "Allow Prepayment to 'N***' Suspended Earnings Lease" in the Miscellaneous Customizations option of the Portfolio [U0212] update is set to 'Y', the prepayment amount (if any on the lease) is displayed as credit memo.
- OTHER
AMOUNT DUE
The dollar
amount of the above referenced charges is displayed. This figure is NOT included
in the PAYMENT + TAX AMOUNT DUE field.
If
the lease is in a suspended earnings status and the INVOICE DUE DATE is after
the effective date of the earnings suspension, the PAYMENT AMOUNT DUE is displayed
separated into SUSPENDED PRINCIPAL and SUSPENDED INTEREST for simple interest
and precomputed type leases. The PAYMENT AMOUNT DUE is displayed as SUSPENDED
INTEREST for operating type leases. These amounts are NOT included in the PAYMENT
+ TAX AMOUNT DUE field.
If the lease is in suspended earnings with status 'N***' and the switch "Allow Prepayment to 'N***' Suspended Earnings Lease" in the Miscellaneous Customizations option of the Portfolio [U0212] update is set to 'Y', the prepayment amount (if any on the lease) is displayed as credit memo.
- PAYMENT
+ TAX AMOUNT DUE
The
total of PAYMENT AMOUNT DUE and USE TAX AMOUNT DUE is displayed.
- DATE
LST UPDATE
The processing
date of the most recent payment is displayed. If no payment has been made on this
invoice, the date the invoice was last changed (e.g., through the Cycle Accrual
update [U0301]) is displayed.
- INTEREST
ADJUSTMENTS
Any interest
adjusted is displayed (e.g. interest unpaid, interest carryover, etc.). Positive
amounts indicate interest due on outstanding invoices. Negative amounts indicate
interest overpaid.
IBL
Accounts Receivable Balancing Report
The
IBL Accounts Receivable Balancing report [R0404B] reports at the invoice level
and provides the following detail for each accounts receivable item:
- LEASE
The
lease number is displayed.
- SE
An asterisk (*) is displayed
if the lease is in a suspended earnings status and the INVOICE DUE DATE is after
the effective date of the earnings suspension.
- LESSEE
NAME
The short form
of the lessee name is displayed.
- INVOICE
NUMBER
The invoice number
of the payment is displayed.
- INVOICE
DUE DATE
The payment
due date of the invoice is displayed.
- PRINCIPAL
AMOUNT DUE
The loan
principal amount excluding interest is displayed. Also included in this field
are any interim rents, security deposits or down payments amounts due and outstanding.
Principal amounts
of invoices due after the effective date of the earnings suspension of a suspended
lease are not displayed in this column. They are displayed in the OTHER AMOUNT
DUE column.
- INTEREST
AMOUNT DUE
The calculated
interest due plus any interest adjustments carried over from previous invoices
are displayed.
Interest
amounts of invoices due after the effective date of the earnings suspension of
a suspended lease are not displayed in this column. They are displayed in the
OTHER AMOUNT DUE column.
- TYPE
OF OTHER AMOUNT DUE
A
description of additional charges or assessments due (e.g., Use Tax, Property
Tax, Late Charges, Recurring Charges, etc.) is displayed. If the Name Assessments module is purchased, the customized assessment names will be displayed.
If the lease is in
a suspended earnings status and the INVOICE DUE DATE is after the effective date
of the earnings suspension, SUSPENDED PRINCIPAL and SUSPENDED INTEREST is displayed.
If the lease is in suspended earnings with status 'N***' and the switch "Allow Prepayment to 'N***' Suspended Earnings Lease" in the Miscellaneous Customizations option of the Portfolio [U0212] update is set to 'Y', the prepayment amount (if any on the lease) is displayed as credit memo. The rule does not apply on matured IBLs (i.e. matured 'N***' suspended earnings leases and 'NMAT'
matured leases).
- OTHER
AMOUNT DUE
The dollar
amount of the above referenced charges is displayed. This figure is NOT included
in the PRIN + INT AMOUNT DUE field.
If
the lease is in a suspended earnings status and the INVOICE DUE DATE is after
the effective date of the earnings suspension, the SUSPENDED PRINCIPAL and SUSPENDED
INTEREST amounts are displayed. These amounts are NOT included in the PRIN + INT
AMOUNT DUE field.
If the lease is in suspended earnings with status 'N***' and the switch "Allow Prepayment to 'N***' Suspended Earnings Lease" in the Miscellaneous Customizations option of the Portfolio [U0212] update is set to 'Y', the prepayment amount (if any on the lease) is displayed as credit memo. The rule does not apply on matured IBLs (i.e. matured 'N***' suspended earnings leases and 'NMAT'
matured leases).
- PRIN
+ INT AMOUNT DUE
The
total of PRINCIPAL AMOUNT DUE and INTEREST AMOUNT DUE is displayed.
- DATE LST UPDATE
The processing date of the
most recent payment is displayed. If no payment has been made on this invoice,
the date the invoice was last changed (e.g., through the Cycle Accrual update
[U0301]) is displayed.
- INTEREST
ADJUSTMENTS
Positive
amounts indicate interest due on outstanding invoices. Negative amounts indicate
interest overpaid.
Additional
interest charges which result from a late payment appear as part of INTEREST AMOUNT
DUE on the next invoice accrued after the late payment's due date. They do not
appear as INTEREST ADJUSTMENTS. Note:
Before LeasePak release 2.1a, such additional interest charges were added as INTEREST
ADJUSTMENTS to the invoice on which the principal was originally billed.
Interest credits are
automatically applied to subsequent interest billed. They are always applied to
interest, never to principal.
- TOTALS
Page totals for the
number of outstanding invoices and all dollar amounts are shown by office. Group
totals are shown if customer/group is selected. Totals
are shown for advanced payments by office. Region, company, portfolio and grand
totals are shown for the number of invoices and all dollar amounts. Customer totals
are shown if customer/group is selected.
If
the report includes invoices for leases placed on earnings suspension, and the
invoices are due after the effective date of the suspension, the suspended payment
amounts due are totaled separately as SUSPENDED PRINCIPAL and SUSPENDED INTEREST
under the OTHER AMOUNT DUE column. All other charges listed under this column
are totaled as ALL OTHER CHARGES.
Balancing
Procedures
The PAYMENT
+ TAX AMOUNT DUE totals for each accounting unit (portfolio, company, region,
and office) should balance to the Lease Payments Receivable General Ledger account
on the General Ledger Entries Listing report [R0406]. When balancing, both the
Accounts Receivable Balancing report [R0404] and the General Ledger Entries Listing
report [R0406] should be generated at the same time.
LeasePak Documentation Suite
©
by NetSol Technologies Inc. All rights reserved.
The
information contained in this document is the property of NetSol Technologies Inc.
Use of the information contained herein is restricted. Conditions of use are subject
to change without notice. NetSol Technologies Inc. assumes no liability for any inaccuracy
that may appear in this document; the contents of this document do not constitute
a promise or warranty. The
software described in this document is furnished under license and may be used
or copied only in accordance with the terms of said license. Unauthorized
use, alteration, or reproduction of this document without the written consent
of NetSol Technologies Inc. is prohibited.
Your document is loading...
This message should disappear within 5-15 seconds, depending on the size of the document and the speed of your connection to the Documentation Suite.
If you can still see this message after 20 seconds, try clicking the Refresh or Reload button on your Web browser.
If your document still does not load, refer to Document Load Troubleshooting for instructions on how to fix possible problems with either your Documentation Suite installation or Web browser setup.
If you do not have read access to the parent docsuite directory, you will not be able to load the Document Load Troubleshooting document. In this case, contact your network administrator for assistance.